Multi-stations Automatic Centrifugal Casting Machine

Foshan Davinci Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of multi-stations automatic centrifugal casting machine in China, also supports customized service. Please feel free to wholesale cheap multi-stations automatic centrifugal casting machine in stock here from our factory. For price consultation, contact us.

Multi-stations Automatic Centrifugal Casting Machine

The Multi-Stations Automatic Centrifugal Casting Machine is mainly used for the production of rice cooker heating plate, relying on the centrifugal force brought by rotation to quickly shape the product The Multi-Stations Automatic Centrifugal Casting Machine can produce four heating plate at the same time, improving the production efficiency of the heating plates.

1. The Multi-Stations Automatic Centrifugal Casting Machine has been designed to enhance production capacity and efficiency. The Multi-Stations Automatic Centrifugal Casting Machine is capable of producing up to 5,000 heating plates per hour, reducing production costs and improving productivity.

2. One of the main benefits of The Multi-Stations Automatic Centrifugal Casting Machine is the high product qualification rate, which is as high as 99%. This means that the heating plates produced by the machine are of high quality and meet all the requisite standards and specifications.

3. The Multi-Stations Automatic Centrifugal Casting Machine is also equipped with PLC control, which makes it easy to operate and manage. This reduces the need for human intervention, thus minimizing errors and mistakes. With its advanced technology and automation, the multi-stations automatic centrifugal casting machine provides a seamless and streamlined production process that is both efficient and cost-effective.

 

1. When the manipulator alarms, it is absolutely impossible to operate reset and one-key start when the alarm is not cleared. The alarm must be cleared and then operated.

If you need to turn on the emergency stop button after pressing the emergency stop button in an emergency situation, please put the automatic mode of the manipulator into the stop state first.

2. The above picture is a schematic diagram of the running direction of the manipulator, which is marked as the vertex of the manipulator's lower limit position of 4-stations Automatic Centrifugal Force Casting Machine.

3. The red box marked positions in the picture above are the positions of the 1 reverse low speed limit sensor and the 2 reverse low speed limit sensor block positions.
When the probe does not touch this position, it will immediately alarm when the probe touches the aluminum water.

4. The figure above is a schematic diagram of the probe. The left and right two are for molten aluminum detection, and the middle probe is for protection of 4-stations Automatic Centrifugal Force Casting Machine . When the probe touches the molten aluminum or the mechanical part of the manipulator, an alarm will be generated and the manipulator will stop working, which needs to be checked. Keep the probe and probe holder clean during daily use. The green mark is the probe connection line.

In the process of use, it should be ensured that the aluminum water in the furnace is kept above 80%! ! !

Hot Tags: multi-stations automatic centrifugal casting machine, China multi-stations automatic centrifugal casting machine manufacturers, suppliers, Multi stations Metal Spin Fully Automatic Die Casting Machine, Fully Automatic Die Casting Machine, Multi stations Automatic Vertical Casting Machine, 4 stations Automatic Vertical Metal Die Casting Machine, Centrifugal Casting Machine, 4 stations Automated Vertical Die Casting Machine