12-stations Tubular Heater Contracted Machine
video
12-stations Tubular Heater Contracted Machine

12-stations Tubular Heater Contracted Machine

Elevate your manufacturing process with our 12-Stations Tubular Heater Contracted Machine. Precision-engineered for stability and adaptability, it's your go-to for efficient magnesium oxide powder compaction. Learn More.

Foshan Davinci Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of 12-stations tubular heater contracted machine in China, also supports customized service. Please feel free to wholesale cheap 12-stations tubular heater contracted machine in stock here from our factory. For price consultation, contact us.

 

 

12-stations Tubular Heater Contracted Machine

 

Products Description

 

The 12-stations Tubular Heater Contracted Machine is mainly used to compress pipe diameter and is designed to increase the density of magnesium oxide powder in heating elements. Adopting an overall cast frame to ensure stable performance. The machine is versatile and can replace pipes of different diameters.

In order to meet the needs of different customers, it is available in three models of 12, 16 and 18 stations. Additionally, two roller types are available: high-speed rollers and tungsten alloy steel rollers.

 

Main feature

 

1. The machine body adopts an integrated coin structure with small deformation, high precision and durability.
2. As the diameter of the pipe decreases, the speed of each pair of axle wheels increases. This ensures good linear characteristics and minimal deformation after the pipe shrinks, thereby extending the length and saving material.
3. In the process of adjusting the compression ratio of the pressure roller, the high center of the pressure roller remains unchanged.
4. The compressed pipe has a high geometric accuracy and the ovality remains below 0.05.
5. The motor is equipped with overload protection and will automatically stop when blocked.
6. The tube shrinking speed reaches 18m/min, ensuring high efficiency.
7. The 12-station Tubular Heater Contracted Machine is used for copper, iron, aluminum, stainless steel, etc.

 

Product Specification

 

Model

Power Supply

Size(rw*H)mm

Weight(kg)

GV001-12S

Three Phase(380V/50Hz/6kW)

1200X800X1200

1800kg

GV001-16S

Three Phase(380V/50Hz/9kW)

1600X800X1200

2500kg

GV001-18S

Three Phase(380V/50Hz/12kW)

2100X800X1200

2800kg

 

 Operating Instructions(Mechanical adjustment part)

 

After turning on the power and setting the desired production parameters on the touchscreen, you need to adjust the mechanical components.

Rolling machine
 

1. The first step involves adjusting the straightening mechanism at the discharge port based on the pipe diameter and length.

product-454-307
 

2. The second adjustable place is the "dial".

Rolling machine manufacturer
 

3. The third adjustable component is the catheter clamp

 

roll reducing machine
 

4. The fourth component to be adjusted is the photoelectric protection.

 

 

 

 

5. Let's review the basic operation flow of this equipment:

 

① Ensure the equipment is placed on a flat surface. If necessary, adjust the anchor screws up or down to ensure the equipment is level with the ground. Also, adjust the feeder associated with the shrinking machine so that its feed port is level with the shrinking machine's inlet.

② Connect the power supply and turn on the main switch. (Power supply: three-phase 380V, 50Hz, 9.5kW. Wait 10 seconds after powering on.)

③ Check that the power indicator is functioning properly, the emergency stop switch is active, and any loose screws in the electrical and mechanical components.

④ First, set the parameters for the desired heating element production on the control box (detailed instructions are provided above). Then, switch the control box to manual mode and perform the first test run using the "turn switch" to check for any abnormalities.

⑤ Set the specific parameters and adjust the equipment according to production requirements. Test a sample of heating elements to see if they meet product requirements. Once confirmed, proceed to mass production.

 

Potential issues and solutions

 

Issue Solution
1. Machine not heating up:

If the 12-station Tubular Heater Contracted Machine is not heating up, check to ensure that it is plugged in and that the power outlet is working.

 

If the power outlet is working properly, it's possible that the heating element in the machine has burned out and needs to be replaced.

2. Uneven heating:

If the heat pipe is not shrinking evenly, it's possible that the heating element is not heating evenly as well.

 

Check to see if there are any obstructions or damage to the element that could be causing the uneven heating.

3. Machine overheating:

If the machine is overheating, it's possible that the heating element is heating up too much. This could be caused by a faulty thermostat or a buildup of debris on the element.

 

Clean the element and check the thermostat to see if it needs to be replaced.

4. Machine not turning on:

If the 12-stations Tubular Heater Contracted Machine is not turning on, check to see if it's plugged in and if the power outlet is working.

 

If the power outlet is working properly, it's possible that the machine's switch or wiring is faulty and needs to be repaired or replaced.

 

12-stations Tubular Heater Contracted Machine

There are other types of tube shrinking machines: 18-station tube shrinking machine

18-Stations Tubular Heater Shrinking Machine

Hot Tags: 12-stations tubular heater contracted machine, China 12-stations tubular heater contracted machine manufacturers, suppliers, 12 Stations Pipe Shrinking Machine, 12 StationsCopper Tube Shrinking Machine


 

Send Inquiry