Punch Press Machine

Feature description:

This punch press is common type presses with simple structure and easy operation.

It adopts rigid rotating key type clutch with convenient operation and maintennance.

The models marked with character "A" is provided with dual hand operation device, which can choose emregent braking device and photoelectric protection.

It can be matched with various automatic feeding equipment or robot for automatic operation.

Punching press factory 1

Machine Specification

A mechanical punch press is mainly composed of the following parts: body, motor, gear, clutch, brake, crankshaft, connecting rod, slide, workbench, and control system.

Punching press factory 3

The possible faults and troubleshooting methods during the operation:

No.	Obstacles	reason	Exclusion method
Crankshaft	The crankshaft bearings generate heat	1. The shaft or bearing is burned out 2. Poor lubrication 3. When adjusting the clearance, there are too many shaft pads	1. Regrind the journal or scrape the bearing 2. Check the lubrication and clean the oil circuit 3. Readjust the gap
Slider	The rail is hot	1. The clearance of the guide rail is too small 2. Poor lubrication in the guide rail 3. Burns of sliders and guide rails	1. Adjust the rail clearance 2. Clean the oil circuit and strengthen lubrication 3. Scrape the guide rail
Connecting rod	The connecting rod and ball head screw are loose Move, there is a sound inside the slider of Punch Press Machine	1. The locking bolt is loose 2. The spherical cover is loose 3. The wear gap between the ball head and the ball seat is large	1. Tighten the bolts 2. Tighten the spherical cover bolt 3. Reduce the gasket of the ball cover to make the gap appropriate
Clutch	When the pedal is stepped down, the clutch does not function, and when the clutch is disengaged, there is a violent impact phenomenon	1. The tension spring of the working key is broken or too loose 2. The end of the working key is broken or the working key is damaged 3. The brake is too loose	1. Replace the pull yellow 2. Replace the work button 3. Adjust the spring of Punch Press Machine
Brake	The brakes overheat and the crankshaft stops over the upper limited position.	1. The brakes are too tight 2. The brake is too loose or worn	1. Adjust the brake bolt 2. Adjust the spring or replace the brake belt of Punch Press Machine

Application

Punch Press machines are a core piece of equipment in the production of small appliances and kitchenware. Their high efficiency and precision are ideally suited for large-scale manufacturing of these products. The following are specific applications and common examples of punching machines in small appliance and kitchenware production:

Main Processes and Applications
In small appliance and kitchenware manufacturing, punching machines primarily perform the following two processes:
Blanking (separation process): used to create flat components.
Blanking: used to create the outer shape of a part.
Punching: used to create various screw holes, heat dissipation holes, button holes, etc. on components.
Forming (deformation process): used to create three-dimensional structures.

Punch press machine

Hot Tags: punch press machine, China punch press machine manufacturers, suppliers, 40T Punching Power Press Hole Punching Machine, Punch Press Machine, 40T Punch Press Machine, , Power Press Die Punching Machine, 40T Punch Press CNC Punching Machine

Application

Punch Press machines are a core piece of equipment in the production of small appliances and kitchenware. Their high efficiency and precision are ideally suited for large-scale manufacturing of these products. The following are specific applications and common examples of punching machines in small appliance and kitchenware production:

Main Processes and Applications
In small appliance and kitchenware manufacturing, punching machines primarily perform the following two processes:
Blanking (separation process): used to create flat components.
Blanking: used to create the outer shape of a part.
Punching: used to create various screw holes, heat dissipation holes, button holes, etc. on components.
Forming (deformation process): used to create three-dimensional structures.

Punch press machine