Heating Tubular Bending Machine
video
Heating Tubular Bending Machine

Heating Tubular Bending Machine

Looking for a reliable heating tubular bending machine? Davinci offers dual-servo, PLC-controlled bending machines with free trial testing. 15 years of heating element manufacturing expertise.

Foshan Davinci Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of heating tubular bending machine in China, also supports customized service. Please feel free to wholesale cheap heating tubular bending machine in stock here from our factory. For price consultation, contact us.

 

Heating tubular bending machine

Introduction: Why Tube Bending Quality Determines Heating Element Performance
In the production of tubular heating elements, the bending process is one of the most critical steps. Whether you are manufacturing air fryer heating elements, oven heating tubes, immersion heaters, or spiral heating elements, the precision of the bend directly affects:

Heating uniformity – Poor bends create hot spots and cold zones
Assembly fit – Inaccurate angles cause installation failures
Product lifespan – Stress points from bad bends lead to premature failure
Production efficiency – Slow changeover times kill your output

 

At Foshan Davinci Technology Co., Ltd., we have spent 15 years mastering both heating element production and the machines that make them. This unique dual expertise allows us to build a heating tubular bending machine that solves real production pain points.

Heater bending machine for sales

What Is a Heating Tubular Bending Machine?

A heating tubular bending machine is a specialized piece of equipment used to bend metal tubes (after the powder filling and shrinking process) into specific shapes required for heating elements.

These shapes include:

  • U-shapes for immersion heaters
  • Spiral/coil shapes for air fryers and convection ovens
  • Custom angles for ovens, grills, and industrial heating equipment

Unlike general-purpose pipe benders, heating element bending machines must handle thin-walled tubes filled with magnesium oxide powder without causing cracks, deformation, or powder leakage.

 

Core Technologies: What Makes Our Bending Machine Different?

1. Dual High-Precision Servo Motors

Our automatic heating tubular bending machine is equipped with two sets of high-precision servo motors that independently control:

Feeding process – Precise tube advancement

Rotation bending process – Accurate angle and radius control

This dual-servo design ensures consistent and accurate forming on every piece, eliminating the variations common in pneumatic or hydraulic systems.

 

Wide Application Range

Our heating tubular bending machine is specifically designed for the electric heating industry and is suitable for producing:

Application Typical Products
Household Appliances Air fryers, ovens, heaters, electric furnaces
Water Heating Immersion heating elements, water heater tubes
Commercial Equipment Deep fryers, grills, warming trays
Industrial Heating Duct heaters, process heating elements

 

Technical Parameters

Power Supply

Simplex (220V, 50Hz, 3Kw)

Gas Source

0.5~0.8Mpa

Effectiveness

3000~5000pcs/8hours

Dimensions

800x500x1200mm

Weight

200kg

 

dual servo tube bending machine

Why Choose Davinci? More Than Just an Equipment Supplier

15 Years of Heating Element Manufacturing Experience

Davinci is not just a machine builder. We operate our own heating element factory producing:

  • Rice cooker heating elements
  • Kettle heating elements
  • Air fryer heating elements
  • Oven heating tubes

This means we understand every pain point in your production process because we face them ourselves every day.

 

Free Trial Run Service

Before shipping any heating tubular bending machine, we offer a free bending test:Send us your tubing

We conduct a trial run on our machine

We provide samples and test data

Results speak for themselves

This ensures the machine is 100% operational and suitable for your specific product before you invest.

 

Comprehensive Training

We provide comprehensive training from operation to basic equipment maintenance, ensuring your team gets started quickly and confidently.

Continuous Support

Remote technical support for troubleshooting

Ample spare parts supply to guarantee uninterrupted production

Engineer on-site service available for production line setup

 

Frequently Asked Questions

Q: What tube materials can your bending machine handle?
A: Our machine is suitable for iron tubes, aluminum tubes, stainless steel tubes, and other metal tubes commonly used in heating element production.

Q: Can I produce both left-hand and right-hand spiral tubes on the same machine?
A: Yes! Our PLC control system allows you to switch between different rotation directions and pitches by simply recalling preset parameters on the touchscreen. No mechanical changeover required.

Q: What is the typical lead time?
A: Standard machines are typically available in 30-45 days. Customized configurations may require additional time. Please contact us for specific lead times.

Q: Do you provide after-sales service?
A: Absolutely. We offer remote technical support, spare parts supply, and on-site engineer service for production line installations.

 

Conclusion: Precision Bending Starts Here

If you are looking for a heating tubular bending machine that delivers:

✅ High precision with dual servo motors
✅ Fast changeover with PLC touchscreen control
✅ Proven reliability from a manufacturer with 15 years of experience
✅ Free trial testing before you buy

 

Contact us today to discuss your heating element bending requirements!

 

tube bending machine supplier

Hot Tags: heating tubular bending machine, China heating tubular bending machine manufacturers, suppliers, 90 Degree Pipe Bender, 90 Degree Pipe Bending Machine, Circle Shape Servo Motor Tube Bending Machine

Send Inquiry