Foshan Davinci Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of sandwich bottom brazing machine in China, also supports customized service. Please feel free to wholesale cheap sandwich bottom brazing machine in stock here from our factory. For price consultation, contact us.
Sandwich Bottom Brazing Machine
This is for the adhesion of the casserole of triple bottom by using a friction press welder and is heating furnace, which provides the best temperature conditions with fast and regular.
Main technical indicators
|
Input |
320KVA 220~380V 50/60Hz |
Output |
240KW 300kHZ |
|
Capacity |
About 8s/pc; 450pcs/H |
Operating Capability |
a)Attachable aluminum thickness:1.3mm~10mm b) Attachable Circle Maximum diamter:320mm c)Heating terprature:450℃ |
|
Dimension: |
1900mmx2800x2000mm 1900mm x1950mmx2000mm (LXWXH) |
Gross weight |
About 5bTon |

Main Components of the Equipment
Vibration Unit:
1. Dual oscillation system
2. Internal ventilation and automatic temperature control (maintained at 30-40°C)
3. Output range: 0-60 kW, 300 kHz
4. Oscillator circuit switching device
Power Control Unit
1. SCR power supply control enables precise control of heating conditions
2. Digital overcurrent protection system with vacuum tubes
3. PLC-based operation allows selection of the most suitable control system for the operator
4. CCM PCB operation provides visibility into the machine's status
Rectifier Unit: Boost and AC-DC rectifier required for the oscillation unit
1st input voltage: 0-380 ACV
2nd input voltage: 0-10,000 ACV
1st rectifier voltage: 10,000 ACV
2nd rectifier voltage: 10,000 DCV
Distilled water cooling system
1. Internal circulation of distilled water for cooling
2. The system eliminates corrosion in cooling water pipes
Operating pressure: 4-6 kg/cm² Flow rate: 120 I/min
3. Heat exchanger: Internal circulation rate 12 m³/hr, external circulation rate 30 m³/hr
4. A thermometer is used to measure water temperature, pressure, and volume to operate protective mechanisms


Core Working Principle
Currently, mainstream composite sandwich bottom brazing machines primarily utilize the following technologies: High-Frequency Induction Brazing
Process: The pot body and composite bottom (with a brazing ring and flux pre-placed between them) are placed in a fixture. The equipment generates high-frequency alternating current, which, through the induction coil, creates powerful eddy currents in the pot bottom, rapidly heating the pot and composite bottom (in a few seconds to tens of seconds).
Heating: Heat is generated directly from within the metal, making it extremely efficient.
Environment: Typically performed in air, flux (solder paste) is used to prevent oxidation and promote brazing flow.
Features: Fast heating and high production efficiency, but requires high workpiece shape and coil matching.
Brief Description of the Brazing Process
Loading -> Workpiece Positioning -> High-Frequency Induction Heating -> Brazing Melts and Fills the Welding Seam -> Cooling and Solidification -> Unloading
Please note: When using this sandwich bottom brazing machine, ensure that workers are trained before taking up their posts to avoid personal injury caused by improper operation of the equipment.
Hot Tags: sandwich bottom brazing machine, China sandwich bottom brazing machine manufacturers, suppliers



