Introduction Of Resiatance Winding Machine

  The resistance winding machine sends the material from the feeding device to a group of clamping devices that are pushed by the cylinder to move towards each other for clamping and positioning; the wire feeding device sends the resistance wire to the iron cap on the left side of the material according to the outlet angle; the other group of cylinders Push the upper and lower electrodes to approach the material, and the electrodes will retreat after the spot welding is completed; the transmission screw of the winding device uses the stepping motor to rotate the transmission mechanism, so that the wire feeding and electrode devices locked on it will move synchronously. At the same time, with the above The stepping motor rotates synchronously to clamp the material. The stepping motor rotates the clamping rod of the clamping device, so that the material rod of the resistance wire is equidistantly spirally wound, and the microcomputer controls the action of each mechanism. It is characterized in that it includes a feeding device, a clamping device, a wire feeding device, an electrode device and a wire winding device.