Turning Machine
Product introduction
The turning Machine is designed for texturing the surface of heating plates, featuring the following attributes:This turning machine is specifically designed for the surface texture of unheated platens and offers the following features:
1. Automated production: The worker places the heating plate into the fixture, and the turning machine automatically clamps it.
2. Fast production: A single product can be processed in just 8 seconds, resulting in high production efficiency.
3. Easy operation: Only manual workpiece placement is required, requiring minimal operator skill.
4. Reduced labor: Automation significantly reduces operator workload and increases the degree of automation in production.
Product Parameter
|
Power supply |
3-phase and 4-wires 380V+N 50Hz |
|
Power |
6.28KW |
|
Efficiency |
1900-2400pcs∕8h |
|
hydraulic pressure |
2.4-2.7Mpa |
|
atmospheric pressure |
0.5-0.8Mpa |
|
Size |
1800x1000x1500mm |
|
Machine Weight |
850KG |
|
Capacity |
300pcs/hr |
Technical Highlights
1. Equipped with an advanced motor control system to ensure product precision
2. The machine utilizes high-efficiency motors and precision guideways to ensure efficient and stable production
3. Customizable surface treatment technology to meet the texture width requirements of various heating plates
4. The tool does not require complete replacement; only the blade pellets need to be replaced, saving time in tool setting
Product Maintenance
In order to keep the turning machine tools in good condition, it is very important to insist on regular maintenance in addition to timely repairs when failures occur.
The following are some daily maintenance tasks:
1. Do a good job of cleaning and lubricating the surface of each guide rail every day. Machine tools with automatic lubrication systems should regularly check and clean the automatic lubrication system, and check the oil.
The amount, add lubricating oil in time, and check whether the oil pump starts and stops regularly.
2. Pay attention to check the cooling system, check the liquid level, add oil or water in time, and replace and clean the oil and water when they are dirty.
3. Pay attention to check the main shaft drive belt and adjust the tightness.
4. Pay attention to check the tightness of the guide rail inserts and adjust the gap.
5. Pay attention to check whether there is any abnormal noise in the oil tank pump of the hydraulic system of the CNC Lathe Machine tool, whether the height of the working oil level is appropriate, and whether the indication of the excitation meter is normal.
6. Pay attention to check whether the guide rails and the protective cover of the CNC Lathe Machine tool are complete and effective.
7. Pay attention to check the mechanical precision of each moving part to reduce the shape and position deviation.
8. Do a good job of cleaning the machine tool every day after work, cleaning iron filings, and wiping the coolant on the guide rail to prevent the guide rail from rusting.
Hot Tags: Turning Machine, China Turning Machine manufacturers, suppliers, Automatic Cnc Vertical Lathe, Automatic Diy CNC Lathe, CNC Turning Diy Lathe, Lathing Machine, Cnc Vertical Lathing Machine, CNC Mechanical Vertical Lathe